深圳市万联通泰科技有限公司

News

Product

Contact

Company: Shenzhen wanlian Tongtai technology co. LTD

Linkman:    Mr Zhou

Mob:18938636760

Linkman:Zhang Jianxiang

Mobile:13751065728

Tel:0755-81727065

E-mail:RaoYongLXY@163.com

Fax:0755-81727270

Web:en.szwltt.com

Add:2 / f, no. 3, lane 1, jiazetang second industrial zone, gongming town, guangming new district, shenzhen

The car line manufacturer introduces the principles to be observed when assembling the wiring harness

Your current location: Home >> News >> Industry news

The car line manufacturer introduces the principles to be observed when assembling the wiring harness

Release date:2018-06-01 The author: Click on:

 汽车线厂家

In general, when assembling automobile wire harness, there are some principles to be followed. The following are the points to be noted in the process of assembling automobile wire harness by automobile wire harness manufacturer.

First of all, don't pull wire when assembly is too tight (especially in the horizontal layout wiring harness), otherwise the vehicle under the turbulence state, wire mounting position will happen rupture, which resulted in increased distance between two fixed point instantly, which stretched wire harness internal contact pulled off/receive, wire parameters change, even broken wires, prone to traffic accidents.

Second, do not place connectors of the same type and color in adjacent locations. Avoid improper insertion during assembly and damage wire bundles and appliances.

Thirdly, after the wire bundle is assembled, there should be enough clearance around it to ensure that it is not pressed by other parts or tripped by other parts and their fasteners. It should avoid the fault of wire bundle insulation caused by clamping, wearing or cracking, such as grounding.

Fourth, splice pieces to decorate to easily find the position, the position of the in hand tools and easy to operate. In order to facilitate inspection, maintenance, need according to the actual assembly with the length of the wire an electric parts. If the electrical installation position in the surface of easy to operate, can save wire to plug is connected directly to part; If the installation position of electrical appliances is relatively hidden, and the later maintenance and disassembly are difficult, the length of wires carried by electrical appliances can be appropriately increased according to the need, so that the arrangement of connectors in a convenient location for inspection and maintenance.

In the actual operation process, we should not only carry out the assembly work of automobile wiring harness according to the above points of attention, but also keep finding out problems, and research out more methods to solve the possible hidden dangers in the assembly of wire harness.

URL of this article:http://en.szwltt.com/news/406.html

Key words:高频线厂家,排线厂家,汽车线厂家

Recently Viewed:

  • service
  • Tel
    18270919270
  • Message
  • Welcome
    Please enter message content here
    Name
    Name
    phone
    phone
    mailbox
    mailbox
    address
    address